CELLULAR MODEM MODULE HOW TO
CELLULAR MODEM MODULE SERIAL
CELLULAR MODEM MODULE SOFTWARE
CELLULAR MODEM MODULE SERIES

CELLULAR MODEM MODULE HOW TO

View this sample program for how to use some of the terminal commands with CELL2XX modules.The COAXNTN-L cable and a surge protector ( pn 31317) are used when the CELL215 is susceptible to lightning or electrostatic buildup or for long cable runs. The COAXSMA-L cable connects the antennas directly to the CELL215 cellular antenna connector. Our higher gain omnidirectional ( pn 18285) and Yagi ( pn 31128) antennas require a cable to connect them to the CELL215. Our 4G/3G/2G 0 dBd cellular dipole whip antenna ( pn 32256) connects directly to the CELL215 (no cable required) and can transmit short distances. AntennasД¬ampbell Scientific offers three antennas for the CELL215. When using the SW12V terminal, the modem can typically be powered with a BP12 battery, a CH150 charging regulator, and an SP10 solar panel. Additionally, the CELL215 can be turned on and off easily using a data logger SW12V port or the IPNetPower() instruction (PPP mode for the CR1000X, CR300, and CR6 only). The average current consumption at 12 Vdc is approximately 14 mA when idle, depending on its configuration. Powering the CELL215Д¬ompared to many other industrial cellular modules, the CELL215 has extremely low power consumption.

CELLULAR MODEM MODULE SERIAL

Common methods include the use of serial or CS I/O cables. Data Logger ConnectionДata loggers can be connected in a variety of ways to suit the needs of the application. The CELL215 can also be configured directly from the data logger when used in PPP mode (default mode) using the Device Configuration Utility or CRBasic instructions. It can be accessed using Internet Explorer or Firefox remotely over the cellular WAN (when in serial server mode) or via USB. The CELL215 is configured using a web-based configuration tool hosted by the cellular module. The Konect routing service is included to assure a secure connection with Campbell Scientific data logger support software. Our data service plans include Verizon in the United States and AT&T in North America (US, Mexico, Canada), as well as international access to over 600 carriers in 185 countries. Establishing Cellular ServiceД¬ampbell Scientific offers low-cost cellular data service plans for the CELL215. The numerous embedded services include IP serial server and client. The CELL215 provides highly reliable connectivity and remote device management independent of the device it is connected to. The CELL215 can also enable many data loggers to communicate using other Internet protocols, such as Modbus, DNP3, email, and web (HTTP).

CELLULAR MODEM MODULE SOFTWARE

Armed with Internet connectivity, a data logger can remotely connect to Campbell Scientific software on a PC, mobile device, and the cloud. The CELL215 provides Internet connectivity to any Campbell Scientific data logger located within range of a compatible cellular network. The CELL215 has two antenna connectors to be used for primary and diversity antennas, although the unit can operate with only the primary cellular antenna connected. These ports are commonly connected to a data logger RS-232 serial or CS I/O port. The CELL215 has an RS-232 serial port and a CS I/O port that can be used for serial server, serial client, and PPP host services. It requires at least one micro-SIM 3FF card (for six position/contacts interface) supplied by your cellular carrier and a suitable 12 or 24 Vdc nominal power source. The CELL215 is an industrial 4G LTE cellular module. For more information, visit the Cellular Data Services page. Note: The CELL215 does not ship with a SIM card unless the cellular modem was provisioned with/for Campbell Scientific cellular data services the SIM card is provided by the carrier when signing up for service.

CELLULAR MODEM MODULE SERIES

The CELL215 is part of the CELL200 series of modems that includes: There is no need for you to work with cellular carriers for provisioning and experience the accompanying hassle. When coupled with Campbell Scientific data services, these devices are ready for you to use out of the box. The CELL215 has very low power consumption when compared to other cellular modems: 14 mA at idle, 39 mA when active, and 300 в™љ when in low power mode. The networking and carrier used by the CELL200 series is determined by the model used and the SIM card inserted into the device. The CELL200 series of external cellular modules are 4G LTE cellular devices that provide serial or CS I/O connectivity to a number of cellular networks, including Verizon, AT&T, T-Mobile USA, Rogers, Bell, Telstra, and Telus. By using Campbell ScientificвЂ™s external line of cellular modules, system integrators, OEMs, and large end users can avoid costly, time-consuming maintenance visits to remote devices around the world.

Cellular modem module